# Treadmill cushioning explained: what softens the deck

Source: https://deckandstride.co.uk/blog/treadmill-cushioning-explained
Published: 2026-10-12
Publisher: Deck and Stride

**In short:** Treadmill cushioning comes from parts that let the deck flex slightly under each step: rubber elastomers or pads between deck and frame, sometimes springs, the deck board itself and a belt with cushioning layers. Listings describe it in terms such as shock-absorbing pads or multi-layer belts. These change how firm the deck feels underfoot and how much impact reaches the floor.

Treadmill listings often mention cushioning: eight-point shock absorption, multi-layer belts, honeycomb systems. It can be hard to know what these terms describe and how to compare them. This explainer goes through the parts that soften a treadmill deck, how they differ between walking pads and running treadmills, and how to read cushioning claims on a listing. It describes how the machines are built, not any effect on your body; if you have joint or foot concerns, ask a GP or physiotherapist.

## Where cushioning comes from

Several parts work together, and most treadmills use more than one of them. The table summarises the main ones and the words listings tend to use for them.

The aim of all of these is the same: to let the walking surface give slightly under each step, then return, without letting the deck bounce or wobble. Too little give feels hard; too much feels unstable, so makers balance the two.

| Part | How it works | Common descriptions |
| --- | --- | --- |
| Elastomers or rubber pads | Sit between deck and frame and compress under load | Shock absorbers, 6-point or 8-point absorption |
| Springs or suspension | Allow the deck to move on some designs | Suspension deck |
| Deck board | Thickness and material affect flex | Rarely stated on home listings |
| Belt layers | Cushioning layers within the belt | 5-layer or 8-layer belt |
| Shaped cushioning systems | Patterned or honeycomb absorbers | Brand-specific names |

Parts that soften a treadmill deck

## Reading cushioning claims on listings

Listings use cushioning language freely, and few give measurable figures. As examples, the Urevo SpaceWalk E4W lists 8-point shock absorption, the TREAFLOW pad lists a 5-layer belt with 6 shock-absorbing pads, the WalkingPad Z1r lists an 8-layer cushioning belt and the Urevo CyberPad lists a honeycomb cushioning system. These tell you which parts are used, but not how soft the deck feels compared with another model.

Treat percentage claims about reduced impact or fatigue with caution unless the maker explains how they were measured. A useful habit is to look for which parts are listed, how many absorbers there are and whether the frame is solid, then compare like with like.

## Walking pads vs running treadmills

Walking pads sit close to the floor, which limits how much the deck can flex. Cushioning on pads usually comes from a few rubber absorbers and the belt. That is generally enough for walking, but the low profile means more impact can reach the floor.

Running treadmills have taller frames and more room for absorbers, so they can provide more deck movement. Some allow you to adjust firmness. If you plan to run, look at folding or running treadmills rather than pads; our [folding treadmill guide](https://deckandstride.co.uk/best/best-folding-treadmills) and [incline treadmill guide](https://deckandstride.co.uk/best/best-incline-treadmills-for-home) compare them.

Belt thickness plays a part on both. A thicker, multi-layer belt adds a little softness and tends to run more quietly, but it can also be heavier and may need slightly more motor effort. On walking pads, where motor ratings are modest, makers usually keep belts relatively thin.

## Cushioning, noise and floors

Cushioning inside the treadmill and a mat underneath do different jobs. Deck cushioning changes how the surface feels underfoot. A dense mat under the machine reduces how much impact and vibration reach the floor and the room below. In a flat, you usually want both. See [do you need a treadmill mat](https://deckandstride.co.uk/blog/do-you-need-a-treadmill-mat) and [are walking pads loud](https://deckandstride.co.uk/blog/are-walking-pads-loud).

Worn absorbers can make a deck feel harder or uneven and can add noise. If an older treadmill starts to thump or rock, check the absorbers and feet as part of the checks in [walking pad vibrating](https://deckandstride.co.uk/blog/walking-pad-vibrating).

## What to look for when buying

Because cushioning is hard to compare from listings, focus on what you can check: the number and type of absorbers, belt layers, frame weight and maximum user weight. A heavier, more solid frame usually feels steadier underfoot. Our [quiet walking pads guide](https://deckandstride.co.uk/best/best-quiet-walking-pads) and [treadmills for heavier users guide](https://deckandstride.co.uk/best/best-treadmills-for-heavier-users) include models with more substantial frames.

- Number and type of shock absorbers listed.
- Belt construction, where stated.
- Frame material and machine weight.
- Maximum user weight with headroom.
- A dense mat to go underneath.

[Compare quiet walking pads](https://deckandstride.co.uk/best/best-quiet-walking-pads)

## Frequently asked questions

**What treadmill has the best cushioning?** It is hard to say from listings alone, because few give measurable figures. Compare the parts listed, frame weight and user limit.

**Do walking pads have cushioning?** Most have rubber absorbers and a layered belt. Their low height limits how much the deck can flex.

**Can I make my treadmill softer?** Not safely by modifying it. A dense mat underneath reduces impact reaching the floor but does not change the deck itself.

**Do shock absorbers wear out?** They can harden or compress over time. Check them if the deck feels different or starts to thump.

## Buying guides on this topic

- https://deckandstride.co.uk/best/best-quiet-walking-pads
- https://deckandstride.co.uk/best/best-folding-treadmills
- https://deckandstride.co.uk/best/best-treadmills-for-heavier-users